LCD-reparatiemal Samsung Galaxy 9295 voor professionele reparatie

El motlle sol fabricar-se en alumini o acer mecanitzat, materials que ofereixen bona resistència i estabilitat dimensional durant la reparació. Les dimensions aproximades són 160 mm x 80 mm x 10 mm, amb un pes d’uns 250 g. Aquests valors poden variar lleugerament segons el fabricant.

Es recomana netejar el motlle després de cada ús amb un drap suau i alcohol isopropílic per eliminar residus d’adhesiu. A més, és aconsellable revisar que no hi hagi deformacions o acumulacions que puguin afectar l’alineació. El material metàl·lic resisteix bé l’ús prolongat si es manté net i lliure de residus.

És fonamental col·locar el dispositiu al motlle completament net i assegurar-se que la superfície de contacte estigui lliure de pols. Es recomana aplicar la quantitat justa d’adhesiu LOCA i evitar moviments durant el curat. Verificar visualment l’alineació abans de fixar definitivament ajuda a prevenir errors freqüents com el desplaçament o l’excés d’adhesiu.

The mould is usually made from aluminium or machined steel, materials that offer good resistance and dimensional stability during repair. Approximate dimensions are 160 mm x 80 mm x 10 mm, with a weight of around 250 g. These values may vary slightly depending on the manufacturer.

It is recommended to clean the mould after each use with a soft cloth and isopropyl alcohol to remove adhesive residue. It is also advisable to check that there are no deformations or build-up that could affect alignment. The metal material withstands prolonged use well if kept clean and free from residue.

It is essential to place the device in a completely clean mould and ensure the contact surface is free from dust. We recommend applying the correct amount of LOCA adhesive and avoiding movement during curing. Visually checking the alignment before final fixing helps prevent common errors such as shifting or excess adhesive.

The mould is usually made from aluminium or machined steel, materials that offer good resistance and dimensional stability during repair work. Approximate dimensions are 160 mm x 80 mm x 10 mm, with a weight of around 250 g. These values may vary slightly depending on the manufacturer.

It is recommended to clean the mould after each use with a soft cloth and isopropyl alcohol to remove adhesive residue. It is also advisable to check that there are no deformations or build-up that could affect alignment. The metal material withstands prolonged use well if kept clean and free of residue.

It is essential to place the device in a completely clean mould and ensure the contact surface is free of dust. Apply the correct amount of LOCA adhesive and avoid movement during curing. Visually checking alignment before final fixing helps prevent common errors such as shifting or excess adhesive.

Formen tillverkas vanligtvis i aluminium eller bearbetat stål, material som ger god hållfasthet och dimensionsstabilitet under reparationen. De ungefärliga måtten är 160 mm x 80 mm x 10 mm, med en vikt på cirka 250 g. Dessa värden kan variera något beroende på tillverkare.