OCA-adhesief folie Samsung Galaxy Note 2 - voorgestanst transparant optisch adhesief
Merk: satkit
IVA inbegrepen (Excl. btw: 1,00€)
De OCA-adhesief folie Samsung Galaxy Note 2 is een voorgestanst transparant optisch adhesief dat speciaal is ontworpen om het glaspaneel met het LCD van de Samsung Galaxy Note 2 te verbinden. Deze folie is een praktisch en efficiënt alternatief voor LOCA (vloeibare optisch transparante lijm), omdat er geen uitharding met een ultravioletlamp nodig is, wat het reparatieproces vereenvoudigt.
Belangrijkste kenmerken:
- Voorgestanst: De folie is al op exact formaat van het scherm van de Samsung Galaxy Note 2 gesneden, wat de installatie vergemakkelijkt.
- Transparant optisch adhesief: Gefabriceerd door Mitsubishi Chemicals, garandeert een heldere en sterke verbinding tussen het glas en het LCD.
- Geen UV-uitharding nodig: In tegenstelling tot LOCA hoeft deze folie niet onder een ultravioletlamp uit te harden, wat tijd en speciale apparatuur bespaart.
- Eenvoudige installatie: De procedure is eenvoudig en kan handmatig worden uitgevoerd of met een speciale machine voor OCA-adhesieven.
Aanbevolen gebruik:
Dit adhesief is ideaal voor technici en gebruikers die LCD-schermreparaties uitvoeren aan de Samsung Galaxy Note 2, en biedt een schone en duurzame oplossing om glas en LCD-paneel zonder complicaties te verbinden.
Installatietips:
- Zorg ervoor dat beide oppervlakken schoon zijn en vrij van stof of resten voordat u de folie aanbrengt.
- Verwijder de grootste beschermfolie en breng de kleefzijde aan op het nieuwe glazen paneel (niet op het LCD-scherm).
- Plaats de folie zorgvuldig om fouten te voorkomen, omdat opnieuw positioneren de folie kan beschadigen.
- Druk gelijkmatig om de folie op het glas te bevestigen.
- Verwijder de tweede beschermfolie en lijn de folie uit op het scherm, gebruik indien mogelijk een mal voor een perfecte pasvorm.
- Breng lichte druk aan om een volledige hechting te verzekeren.
Compatibiliteit:
Dit adhesief is uitsluitend compatibel met de Samsung Galaxy Note 2.
Garantie: Dit product is een verbruiksartikel en heeft geen garantie.
- Voorgestanst transparant optisch adhesief voor Samsung Galaxy Note 2
- Geen UV-lamp nodig, eenvoudigere installatie
- Gefabriceerd door Mitsubishi Chemicals, hoge kwaliteit en transparantie
- Vergemakkelijkt de verbinding tussen glaspaneel en LCD-scherm
- Ideaal voor snelle en nette reparaties zonder gedoe
Klantvragen & Antwoorden
Quin és el material, el gruix típic i el pes aproximat de la làmina d’adhesiu OCA per al Samsung Galaxy Note 2?
La làmina és d’adhesiu òptic transparent (OCA) d’alt grau, fabricat per Mitsubishi Chemicals. El seu gruix habitual és de 0,175 mm ±0,025 mm, i el pes per unitat és molt baix, aproximadament 2 g. Les dimensions estan pre-tallades per ajustar-se exactament al frontal del Samsung Galaxy Note 2.
Hi ha recomanacions de cura i manteniment un cop instal·lada la làmina OCA a la pantalla?
Un cop instal·lada correctament i tancat el muntatge del mòbil, la làmina OCA no requereix manteniment directe. El més important és evitar l’exposició a altes temperatures (>70 °C), pressions excessives o humitat extrema durant la vida útil del dispositiu, ja que poden afectar l’adhesió. No és reutilitzable ni recomanable intentar desenganxar-la després de la instal·lació.
La làmina OCA compleix alguna normativa o requisits de seguretat específics en materials adhesius electrònics?
El material emprat és generalment conforme a normatives internacionals sobre compostos adhesius electrònics, incloent-hi RoHS (Restricció de substàncies perilloses) i normes de qualitat adoptades per fabricants de pantalles. No conté dissolvents volàtils ni materials nocius per a la manipulació habitual, tot i que sempre s’ha d’evitar el contacte prolongat amb la pell i els ulls.
What is the material, typical thickness and approximate weight of the OCA adhesive sheet for the Samsung Galaxy Note 2?
The sheet is made from high-grade transparent optical adhesive (OCA) manufactured by Mitsubishi Chemicals. Its usual thickness is 0.175 mm ±0.025 mm, and the weight per unit is very low, at approximately 2 g. The dimensions are pre-cut to fit the front of the Samsung Galaxy Note 2 exactly.
Are there any care and maintenance recommendations once the OCA sheet has been installed on the screen?
Once correctly installed and the phone assembly has been closed, the OCA sheet requires no direct maintenance. The key is to avoid exposure to high temperatures (>70 °C), excessive pressure or extreme humidity during the device’s service life, as these can affect adhesion. It is not reusable and it is not advisable to try to peel it off after installation.
Does the OCA sheet comply with any specific safety standards or requirements for electronic adhesive materials?
The material used is generally compliant with international standards for electronic adhesive compounds, including RoHS (Restriction of Hazardous Substances) and quality standards adopted by display manufacturers. It does not contain volatile solvents or harmful materials for normal handling, although prolonged contact with skin and eyes should always be avoided.
What is the material, typical thickness and approximate weight of the OCA adhesive sheet for the Samsung Galaxy Note 2?
The sheet is made from high-grade transparent optical adhesive (OCA) manufactured by Mitsubishi Chemicals. Its usual thickness is 0.175 mm ±0.025 mm, and the weight per unit is very low, at approximately 2 g. The dimensions are pre-cut to fit the front of the Samsung Galaxy Note 2 exactly.
Are there any care and maintenance recommendations once the OCA sheet has been installed on the screen?
Once correctly installed and the phone assembly has been closed, the OCA sheet requires no direct maintenance. The key is to avoid exposure to high temperatures (>70 °C), excessive pressure or extreme humidity during the device’s service life, as these can affect adhesion. It is not reusable and it is not recommended to try to peel it off after installation.
Does the OCA sheet comply with any specific safety regulations or requirements for electronic adhesive materials?
The material used is generally compliant with international regulations on electronic adhesive compounds, including RoHS (Restriction of Hazardous Substances) and quality standards adopted by display manufacturers. It does not contain volatile solvents or harmful materials for normal handling, although prolonged contact with skin and eyes should always be avoided.
Vilket material, vilken typisk tjocklek och ungefärlig vikt har OCA-adhesivfilmen för Samsung Galaxy Note 2?
Filmen är av högkvalitativt optiskt transparent adhesiv (OCA) tillverkat av Mitsubishi Chemicals. Den vanliga tjockleken är 0,175 mm ±0,025 mm, och vikten per enhet är mycket låg, cirka 2 g. Måtten är förskurna för att passa exakt på framsidan av Samsung Galaxy Note 2.