4-delige bobine trekker voor Volkswagen en Audi

Les peces estan fabricades en acer tractat per resistir esforços mecànics i el desgast associat a l'ús freqüent. El seu acabat anticorrosiu afavoreix la durabilitat; en condicions normals d'ús professional poden mantenir la integritat estructural durant diversos anys si es guarden seques i netes.

El kit típicament inclou 4 extractors diferents, cada peça amb una longitud aproximada de 150 mm a 200 mm i un pes total del set proper als 800 g. El contingut exacte inclou eines equivalents a T10094A, T10095A, T10166 i una altra peça addicional. L'embalatge sol anar disposat en una safata de plàstic.

Sí, quan les bobines estan aglutinades per residus o presenten deformacions, l'extractor pot facilitar el procés, però hi ha risc de fractura en carcasses de plàstic extremadament envellides. Es recomana aplicar lubricant i fer moviments progressius. No és adequat per a bobines de dimensions fora del rang dels extractors inclosos.

The parts are made from treated steel to withstand mechanical stress and wear associated with frequent use. Their anti-corrosion finish supports durability; under normal professional use they can maintain structural integrity for several years if stored clean and dry.

The kit typically includes 4 different extractors, each piece with an approximate length of 150 mm to 200 mm and a total set weight of around 800 g. The exact contents include tools equivalent to T10094A, T10095A, T10166 and one additional piece. The packaging is usually arranged in a plastic tray.

Yes, when the coils are stuck together by residue or are deformed, the extractor can make the job easier, but there is a risk of fracture in extremely aged plastic housings. It is recommended to apply lubricant and use gradual movements. It is not suitable for coils outside the size range of the included extractors.

The parts are made from treated steel to withstand mechanical stress and wear associated with frequent use. Their anti-corrosion finish improves durability; under normal professional use they can maintain structural integrity for several years if stored dry and clean.

The kit typically includes 4 different extractors, each piece measuring approximately 150 mm to 200 mm in length and with a total set weight of around 800 g. The exact contents include tools equivalent to T10094A, T10095A, T10166 and one additional piece. The packaging is usually arranged in a plastic tray.

Yes, when the coils are stuck with residue or are deformed, the extractor can make the job easier, but there is a risk of fracture in extremely aged plastic housings. It is recommended to apply lubricant and use gradual movements. It is not suitable for coils with dimensions outside the range of the included extractors.

Delarna är tillverkade av behandlat stål för att tåla mekanisk belastning och slitage vid frekvent användning. Den korrosionsskyddande ytbehandlingen bidrar till hållbarheten; under normala professionella förhållanden kan de behålla sin strukturella integritet i flera år om de förvaras torra och rena.