USB-A naar Micro-USB kabel met schakelaar voor Raspberry Pi 1m zwart

El principal avantatge és la inclusió d'un interruptor ON/OFF integrat al cable, que permet tallar el subministrament elèctric sense necessitat de desconnectar físicament el cable del dispositiu o del port USB. Això és útil per evitar cicles de connexió/desconnexió que puguin danyar el port o el connector, i facilita reinicis ràpids d'equips com Raspberry Pi sense manipular el maquinari.

Aquest cable està destinat únicament a la càrrega elèctrica i no transmet dades sota cap estàndard USB. Tampoc no admet especificacions de càrrega ràpida com Quick Charge o Power Delivery, ja que l'interruptor pot limitar el corrent màxim a aproximadament 2 A a 5 V (10 W màxim), adequat per a la majoria de dispositius Micro USB, però insuficient per a càrrega ràpida en mòbils compatibles.

El cable és de PVC negre, amb conductors interns de coure estàndard. Longitud total: 1 m (±3 %). Connectors USB 2.0 A mascle en un extrem i Micro USB B mascle a l'altre. El paquet conté únicament 1 cable de càrrega, sense manuals ni accessoris addicionals.

L'interruptor mecànic suporta un cicle estimat d'almenys 10.000 accions. Per maximitzar la vida útil, es recomana accionar l'interruptor amb suavitat i evitar sobrecarregar el cable amb dispositius que demanin més de 2 A. No requereix manteniment especial, tot i que es recomana netejar ocasionalment els connectors amb aire comprimit o un drap sec per evitar contactes deficients.

The main advantage is the integrated ON/OFF switch in the cable, which allows the power supply to be cut without physically disconnecting the cable from the device or USB port. This is useful to avoid repeated plugging and unplugging that could damage the port or connector, and it makes quick resets of devices such as Raspberry Pi easier without handling the hardware.

This cable is intended for charging only and does not transmit data under any USB standard. It also does not support fast-charging specifications such as Quick Charge or Power Delivery, as the switch may limit the maximum current to approximately 2 A at 5 V (10 W maximum), which is suitable for most Micro USB devices but insufficient for fast charging on compatible phones.

The cable is black PVC, with standard internal copper conductors. Total length: 1 m (±3%). USB 2.0 A male connector on one end and Micro USB B male on the other. The package contains only 1 charging cable, with no manuals or additional accessories.

The mechanical switch is rated for an estimated cycle life of at least 10,000 operations. To maximise service life, it is recommended to operate the switch gently and avoid overloading the cable with devices that draw more than 2 A. No special maintenance is required, although it is recommended to clean the connectors occasionally with compressed air or a dry cloth to prevent poor contact.

The main advantage is the integrated ON/OFF switch in the cable, which allows you to cut the power supply without physically disconnecting the cable from the device or USB port. This is useful to avoid repeated plugging and unplugging that may damage the port or connector, and it makes quick resets of devices such as Raspberry Pi easier without handling the hardware.

This cable is intended for power charging only and does not transmit data under any USB standard. It also does not support fast-charging specifications such as Quick Charge or Power Delivery, as the switch may limit the maximum current to approximately 2 A at 5 V (10 W maximum), which is suitable for most Micro USB devices but insufficient for fast charging on compatible phones.