Kunststof projectbehuizing 170x130x60mm stevig en waterdicht
Merk: satkit
IVA inbegrepen (Excl. btw: 5,00€)
Kunststof projectbehuizing 170x130x60mm
Deze kunststof behuizing is speciaal ontworpen voor elektronische projecten en veilige opslag van gevoelige apparaten. Gemaakt van schokbestendig polystyreen, biedt hij robuuste bescherming tegen impact en ongunstige omgevingsomstandigheden.
Belangrijkste kenmerken:
- Materiaal: gegoten kunststof en schokbestendig polystyreen.
- Buitenafmetingen: 170x130x60mm.
- Constructie uit vier delen voor eenvoudige en veilige montage.
- Waterdichte afsluiting die het binnendringen van vocht en stof voorkomt, ideaal voor het beschermen van elektronische componenten.
- Afsluiting met schroeven die zorgt voor een stevige en duurzame bevestiging.
Typische toepassingen:
- Opslag en bescherming van gevoelige elektronische apparaten.
- Behuizing voor voedingen en andere elektronische apparaten.
- Elektronicaprojecten die een stevige en waterdichte behuizing vereisen.
Compatibiliteit: Deze behuizing is compatibel met een breed scala aan elektronische apparaten en projecten die bescherming nodig hebben tegen schokken, stof en vocht.
Dankzij het robuuste ontwerp en de waterdichte afsluiting is deze behuizing de perfecte oplossing om uw elektronische componenten veilig en georganiseerd te houden.
- Gemaakt van schokbestendig polystyreen voor maximale bescherming.
- Buitenafmetingen van 170x130x60mm, ideaal voor elektronische projecten.
- Waterdichte afsluiting die het binnendringen van vocht en stof voorkomt.
- Bestaat uit vier delen voor eenvoudige en veilige montage.
- Afsluiting met schroeven voor een stevige en duurzame bevestiging.
Klantvragen & Antwoorden
What level of protection against dust and moisture does this plastic case provide, and is it suitable for outdoor use?
The case has a sealed closure with screws, which helps protect against dust and moisture. However, no specific IP rating is stated, so it is not recommended for outdoor use without additional information about its seal and water resistance.
What are the manufacturing materials of the case and what advantages does polystyrene offer over other plastics?
The case is made of impact-resistant polystyrene. Polystyrene offers good rigidity, resistance to light impacts and low weight, although compared with ABS or polycarbonate, it has lower thermal and chemical resistance.
What type of electronic devices can be installed and what is the maximum load supported by the case?
It can house small to medium-sized electronic devices, such as circuit boards, transformers and power supplies. The maximum supported load depends on the type of mounting and weight distribution, but for standard use loads above 1-2 kg are not recommended in stationary use.
What usable internal dimensions does the case have and how much space is available considering the wall thickness?
The external dimensions are 170 x 130 x 60 mm. The typical wall thickness of polystyrene cases of this type is 2-3 mm, so the usable internal space is estimated at approximately 166 x 126 x 56 mm.
Can the case be drilled or modified without compromising its seal or structural strength?
It is possible to drill the case to install connectors or ventilation, but each hole may reduce the seal and affect structural strength. The use of cable glands or suitable seals is recommended if openings are required.
What level of protection against dust and moisture does this plastic box provide and is it suitable for outdoor use?
The box has a sealed screw closure, which helps protect against dust and moisture. However, no specific IP rating is stated, so it is not recommended for outdoor use without additional information about its seal and water resistance.
What are the manufacturing materials of the box and what advantages does polystyrene offer over other plastics?
The box is made of impact-resistant polystyrene. Polystyrene offers good rigidity, resistance to light impacts and low weight, although compared with ABS or polycarbonate, it has lower thermal and chemical resistance.
What type of electronic devices can be installed and what is the maximum load supported by the box?
It can house small to medium-sized electronic devices, such as circuit boards, transformers and power supplies. The maximum supported load depends on the type of mounting and weight distribution, but for standard use loads above 1-2 kg are not recommended in stationary use.
What usable internal dimensions does the box have and what space is available taking wall thickness into account?
The external dimensions are 170 x 130 x 60 mm. The typical wall thickness of polystyrene boxes of this type is 2-3 mm, so the usable internal space is estimated at approximately 166 x 126 x 56 mm.
Can the box be drilled or modified without compromising its sealing or structural strength?
It is possible to drill the box to install connectors or ventilation, but each hole may reduce sealing and affect structural strength. The use of cable glands or suitable seals is recommended if openings are required.
Schrijf een klantbeoordeling
Klanten die dit artikel kochten, kochten ook
Uw recent bekeken artikelen
