Honda OBD1 naar OBD2 kabel - compatibele 5pin naar 16pin diagnose-adapter

El cable té una longitud de 20 cm, està fabricat amb plàstic ABS en color negre i gris, i sol pesar menys de 100 g. La seva mida compacta el fa fàcil d’emmagatzemar i transportar, i l’ABS li aporta bona resistència davant la manipulació freqüent en tallers o vehicles.

L’adaptador no requereix manteniment més enllà d’una neteja ocasional per evitar l’acumulació de pols als pins. El plàstic ABS ofereix bona durabilitat i flexibilitat, permetent un ús freqüent típic de taller. Es recomana evitar estirades brusques i l’exposició prolongada a calor extrema per maximitzar-ne la vida útil.

L’adaptador està dissenyat com a pont passiu de senyal, sense components electrònics actius, per la qual cosa el risc elèctric és baix sempre que s’utilitzi segons la seva finalitat (diagnòstic, no alimentació o reprogramació). No disposa de certificacions específiques com CE o UL, ja que es considera un accessori de baix risc. És fonamental assegurar-se que el contacte es faci només amb el vehicle apagat per evitar curtcircuits.

The cable is 20 cm long, made from black and grey ABS plastic, and usually weighs less than 100 g. Its compact size makes it easy to store and carry, and the ABS gives it good resistance to frequent handling in workshops or vehicles.

The adapter requires no maintenance beyond occasional cleaning to prevent dust build-up on the pins. The ABS plastic offers good durability and flexibility, allowing for frequent workshop use. It is recommended to avoid sharp tugs and prolonged exposure to extreme heat to maximise service life.

The adapter is designed as a passive signal bridge, with no active electronic components, so the electrical risk is low as long as it is used for its intended purpose (diagnostics, not power supply or reprogramming). It does not have specific certifications such as CE or UL, as it is considered a low-risk accessory. It is essential to ensure the connection is made only with the vehicle switched off to avoid short circuits.

The cable is 20 cm long, made from black and grey ABS plastic, and usually weighs less than 100 g. Its compact size makes it easy to store and carry, and the ABS gives it good resistance to frequent handling in workshops or vehicles.

The adapter requires no maintenance beyond occasional cleaning to prevent dust build-up on the pins. The ABS plastic offers good durability and flexibility, allowing frequent workshop use. It is recommended to avoid sharp tugs and prolonged exposure to extreme heat to maximise service life.

The adapter is designed as a passive signal bridge, with no active electronic components, so the electrical risk is low as long as it is used for its intended purpose (diagnostics, not power supply or reprogramming). It does not have specific certifications such as CE or UL, as it is considered a low-risk accessory. It is essential to ensure the connection is made only with the vehicle switched off to avoid short circuits.

Kabeln är 20 cm lång, tillverkad av svart och grå ABS-plast och väger vanligtvis mindre än 100 g. Den kompakta storleken gör den enkel att förvara och transportera, och ABS ger god motståndskraft vid frekvent hantering i verkstad eller fordon.